Discount – new flashlight packed in a ZIP bag.
The Fenix MINI-LITE (formerly known as Fenix E-LITE) is a multi-purpose rechargeable flashlight offering three brightness levels with a beam distance of up to 40 meters at 150 lumens (ANSI). It is powered by a built-in 275 mAh Li-polymer battery that charges via a USB-C port directly on the flashlight. An additional light source includes a red and blue warning light, useful for sports activities or emergencies. Weighing just 18g, the flashlight is ideal for everyday carry. With the integrated clip, it can be attached to clothing, a belt, cap, backpack, or headlamp strap. Its versatility makes it a great tool for hikers, runners, and cyclists alike.
The Fenix MINI-LITE offers three constant lighting modes with up to 20 hours of runtime and two colored flashing modes with up to 22 hours of runtime.
All flashlight parameters (luminous flux, battery runtime, waterproof rating, and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.
Specifications of the Fenix MINI-LITE flashlight
- Uses a white MATCH CA18 LED and red & blue EVERLIGHT 2835 LEDs with a lifespan of 50,000 hours.
- Three white light levels: 150 lumens (1.66 hrs) → 45 lumens (4.30 hrs) → 5 lumens (20 hrs)
- Four colored light modes: red light 3 lumens (8 hrs) → red flashing 3 lumens (22 hrs) → blue light 3 lumens (8 hrs) → blue flashing 3 lumens (22 hrs)
- Built-in 275 mAh Li-polymer battery.
- USB-C charging port.
- Low battery warning, overcharge and over-discharge protection.
- Battery status indicator.
- White light beam distance up to 40 meters (410 cd), color light beam distance up to 7 meters.
- Clip design ensures secure attachment.
- Body made of impact-resistant plastic.
- Dimensions: 5.2 cm × 2.3 cm × 2.0 cm.
- Weight: 18 grams including battery.
- Water- and dust-resistant to IP66 standard (resistant to strong water jets from all directions).
- Packed in a ZIP bag, includes USB-C charging cable and keyring.
- To charge with a standard micro-USB cable, you can purchase a micro-USB to USB-C adapter.
- You can also purchase a USB wall adapter, a car USB adapter, a fast-charging USB adapter, and a USB-C cable.
Turning on the light and activating warning signals
To turn the white light on or off, press and hold the button on the flashlight for about 0.5 seconds. You can switch between the white light brightness modes anytime during operation by pressing the button. To switch to colored light, press and hold the button for 1.2 seconds. You can then toggle between the red and blue lights by pressing the button again.
Battery capacity indicator – When the flashlight is off, briefly press the button once, and its backlight will illuminate for three seconds. A steady green light means the battery is charged between 80% and 100%, a blinking green light indicates about 50% to 80% charge, a steady red light means about 20% to 50% charge, and a blinking red light signals a nearly empty battery (0% to 20%).
Low battery warning – When the battery capacity drops to approximately below 20%, the flashlight will automatically switch to lower power modes to maximize battery life (it will not be possible to switch back to higher modes). If the battery is critically low, the button will start blinking red. In this case, we recommend charging the flashlight as soon as possible to prevent the protective electronics built into the battery from shutting down, which would cause the light to turn off.
Overheat protection – If the flashlight temperature rises above 60°C, it will automatically reduce output gradually. Once the temperature drops below 60°C, the output will gradually increase again.
Charging
- Flip open the rubber cover of the USB-C connector on the bottom of the flashlight and connect it using the included cable to a computer, power bank, wall USB adapter, or car USB adapter. You can also use any mobile phone charger with a USB-C connector for charging.
- During charging, the button lights up red; after full charge, it lights up green.
- Charging time is approximately 1.5 hours. The Li-pol battery used has no memory effect, so the flashlight can be recharged anytime.
- After charging and unplugging the power cable, be sure to seal the USB connector cover.
Warning
- Do not disassemble sealed parts yourself, this will void the warranty.
- If the flashlight blinks or does not light up, it means the battery is discharged. Please charge it.
Warranty
Statutory two-year warranty.
